Description

Input voltage: two input voltage range selectable, (jumper selectable through the back of the PCB, default setting 10-32V input) 1, 8V-16V input 2, 10V-32V input Input Current: 5A (MAX) Quiescent current: 15mA (12V step up to 50V, the higher the output voltage will increase the quiescent current) Output voltage: ± 45-390V continuously adjustable (the default output ± 50V. This module has regulator function, after adjusted output voltage is stable and unchanging, not with changes in input voltage changes) Output Current: 0.2A MAX (affected by input voltage and dropout voltage,the higher the output voltage, the smaller the output current) Output Power: 40W (peak 70W) Working temperature: -40℃ ~ + 85℃(if temperature too high , please enhance heat dissipation) Operating frequency: 75KHz Conversion efficiency: up to 88% (affected by input voltage, output volage, current and dropout voltage ) Short circuit protection: Yes. (Input 10A fuse, at the output please do not short circuit arc, it may damage the electronic component, if you need please add power resistor in series for limiting) Overcurrent protection: Yes. (Input current exceeds 4.5A, reducing the output voltage) Overvoltage protection: Yes (Output voltage exceeds 410V, lowering the output voltage) Input reverse polarity protection: Yes (non-self-healing, reverse burning fuse, you have better not reverse it.) Installation: four 3mm screws Connection: solderless terminals output Module dimensions: 60(L)*50(W)*22(H)mm The capacitor charging time measured data: 470uF full charge to 390V time is 2 seconds 1000uF full charge to 390V time is 4 seconds 2200uF full charge to 390V time is 8 seconds 4700uF full charge to 390V time is 18 seconds Warning! The module output is high voltage, on people, animals have life-threatening, the course please pay attention to safety precautions. We are not responsible. Applications: the capacitor charging, guns power. the power supply for your electronic device, can set the output voltage value according to your system. voltage pressure test power, glow tube power. hunting, rodent. Package ： 1PCS DC-DC 8-32V to ±45V-390V Step-up Module ZVS High Voltage Capacitor Charge Board S Payment Payment Payable To Note PayPal Paypal All payments are due within 7 days of the close of auction. Failing to do so, non-paying bidders will be reported to eBay. Shipping Policy Delivery Time We ship to worldwide, it usually takes 10-30 Business Days to delivery. Shipping address We ship to your PayPal address. Please, make sure to provide us with correct, precise, and detailed shipping Address. Send Time Items will be shipped within 1 to 3 business days upon payment received or cleared. Note If you don't receive items over 30 business days, please notify us via eBay message. Return Policy We appreciate your business and offer an instant 7 days return policy.(7 days after receive the item). The returned item has to be in its original condition. We are able to refund your money without shipping cost. Contact us For anything about product, price, shipping or order status, please contact us via eBay message. We love positive feedback and 5 scores DSR. We will leave it for everyone that leaves it for us.